Do these 10 daily maintenance for the print head of the eco solvent printer, and the service life will be longer

2021-12-20 17:38:38

If you want the printer head to have a long service life and always be in the best working condition, these daily protective and maintenance tasks are indispensable. 10 maintenance recommendations

1. Shut down in accordance with the prescribed procedures: first turn off the control software when shutting down, and then turn off the main power switch to ensure that the carriage returns to its normal position, to ensure that the nozzles and ink stacks are completely closed to avoid clogging the nozzles.

2. When replacing the ink stack core, it is recommended to use the original ink stack core, otherwise the ink core may deform and cause nozzle clogging, ink breakage, incomplete ink extraction, and unclean ink extraction. If the equipment is not used for more than three days, please clean the ink stack core and waste ink tube with cleaning fluid to prevent it from drying and clogging.

3. It is recommended that you use the original original ink, and it is strictly forbidden to mix two different brands of ink, so as to avoid chemical reaction, block the nozzle, and affect the picture quality.

4. Do not plug or unplug the USB printer cable when powered to avoid damage to the motherboard.

5. The machine is a high-speed printer, please be sure to connect the ground wire: ① When the air is dry, the static electricity problem cannot be ignored. ②When using some inferior materials with strong static electricity, static electricity may cause damage to the machine’s electronic originals and nozzles. Static electricity will also cause ink flying during printing. It is forbidden to operate the nozzles with electricity.

6. Because this equipment is a precision printing device, it is recommended to equip a branded voltage stabilizer with a power of about 2000W.

7. Keep the ambient temperature at 15℃-30℃, humidity 35%-65%, keep the working environment clean and avoid dust.

8. Scraper: Clean the ink stack wiper regularly to prevent ink solidification from causing damage to the print head.

9. Working platform: Keep the table surface free of dust, ink, and debris to prevent the nozzle from being scratched.

10. Ink cartridge: close the lid immediately after filling the ink to prevent dust from entering.

The print head is the core component of the eco solvent printer printing. Do a good job of daily maintenance of the print head, so that the equipment can work better and increase production efficiency; at the same time, it can save costs and increase profit margins.

Zhengzhou New Century Digital( Skycolor Eco Solvent Printer: ) Focus on Skycolor Eco Solvent Printer have already used in advertisement for more than ten years . The products have passed ISO9000 and CE certification, owning the trust of most consumers.

The Skycolor Eco Solvent Printer team has an excellent R&D team and a complete production and after-sales service system. It introduces new industry-leading technologies every year, and also participates in many industry exhibitions, showing new products and new technologies. The printing field has built an industry leading position. Skycolor Eco Solvent Printer has many hot-selling models.