Process of replacing motor of eco solvent printer

2022-01-26 11:16:20

I believe everyone is familiar with the universality of the eco solvent printer in our daily life. Do you know the process of replacing the motor of the eco solvent printer?

If it is determined that it is a motor problem, the motor can be replaced according to the following steps:

1. Disconnect the power supply and remove the cover of the eco solvent printer with a screwdriver.

2. Remove the connecting wire of the motor. Remember where it was connected before pulling out the connecting wire, otherwise the wrong interface will burn the motor and cause damage to the main board.

3. Take down the drive belt and pay attention to the process. Do not use too much force to damage the motor.

4. Remove the old motor and install the new one.

Attention must be paid to the installation process. The whole process can be completed with a screwdriver. Tools such as hammer cannot be used to knock, because the eco solvent printer is a precision equipment. If it is knocked, it may cause secondary damage to the eco solvent printer.

Zhengzhou New Century Digital( Skycolor Eco Solvent Printer: ) Focus on Skycolor Eco Solvent Printer have already used in advertisement for more than ten years . The products have passed ISO9000 and CE certification, owning the trust of most consumers.

The Skycolor Eco Solvent Printer team has an excellent R&D team and a complete production and after-sales service system. It introduces new industry-leading technologies every year, and also participates in many industry exhibitions, showing new products and new technologies. The printing field has built an industry leading position. Skycolor Eco Solvent Printer has many hot-selling models.